| Location of Proxy
Assets
|
The name of
the system that stores proxy files generated by K2 Summit
and GV STRATUS
systems, as follows:
- For
proxy stored on the GV STRATUS Lite PC, this is the network name of
the GV STRATUS Lite
PC.
- For
proxy stored on the GV STRATUS Express server, this is
the network name of the server with role GV STRATUS Core
Server Express, as configured in SiteConfig.
- For proxy
stored on the K2 SAN (A1), this is the name of the K2
SAN, as named in K2Config.
- For
proxy stored on the dedicated Proxy Storage system (B1,
C1), this is the name of the Proxy Storage system, as
named in K2Config.
|
| SMB
Server
|
The network machine name of the device hosting the server to
which proxy files are written, as follows:
- For proxy
stored on the GV STRATUS Lite PC, this is the network name of
the GV STRATUS Lite
PC.
- For proxy
stored on the GV STRATUS Express server, this is the
network name of the server with role GV STRATUS Core Server
Express, as configured in SiteConfig.
- For proxy stored
on the K2 SAN (A1), this is the network name of the GV STRATUS Proxy server
attached to the K2 SAN, as configured in K2Config.
- For proxy
stored on the dedicated Proxy Storage system (B1, C1), this
is the network name of the GV STRATUS Proxy Storage file system server,
as configured in K2Config.
|
| HTTP Server |
The network machine name of the device hosting the server
from which GV STRATUS clients read proxy files.
Typically the SMB Server and the HTTP Server are hosted by
the same device. |
| K2 Summit Settings: Enable Proxy
Creation
|
Centralizes the location of proxy
storage based on the Proxy Server Settings.
|
| Proxy Encoder Settings: Enable Proxy Encoders
|
Enables or disables the automatic creation of proxy for high
resolution clips. Does not affect the ability to manually create
proxy from within the GV STRATUS application for a high resolution
clip. Applies only to GV STRATUS systems with Render Engines
that are properly configured and licensed.
|
| Waveform Settings:
Enable Waveform Generation
|
Enables or disables
the creation of waveform cache (*.ewc2) files together with
proxy files for the use in EDIUS application. This setting
is enabled by default. Deselect the check-box if you do not
want waveform cache files to be generated with proxy
files.
|
