Configure iSCSI Initiator Configuration page



This page lists the iSCSI adapter on your K2 Media Server as an iSCSI target. The K2Config application subscribes the SAN client to the iSCSI target and allocates bandwidth, based on the bandwidth values that you enter. The K2Config application keeps track of each SAN client's bandwidth, and when the total amount allowed by the K2 SAN license is consumed, the K2Config application displays an informative message and then disables your ability to add more SAN clients. For large systems the K2Config application can load balance SAN clients across multiple iSCSI targets.

If a custom K2 SAN, qualified system designers can view subnets to help assign iSCSI targets.

  1. Click Modify. The Bandwidth Input dialog box opens.
  2. In the Bandwidth Input dialog box, enter the bandwidth value specified in your system design and then click OK. If the server has the role of encoder, you can calculate encoder bandwidth to determine the value to enter.
  3. Click Next.

The File System Client Configuration page opens.

Parent topic: Configuring a GV STRATUS server on a K2 SAN

Copyright © 2020 Grass Valley Canada. All rights reserved. Specifications subject to change without notice. GV STRATUS 6.10 gvtp_20200811_04:57:17