Installing and configuring SiteConfig support for client PCs on corporate LAN

Before installing software, make sure the client PC meets system requirements, especially regarding Windows operating system and .NET version.

Use this topic to install software (if necessary) and configure PCs that are on the corporate LAN to prepare them for SiteConfig software deployment. This topic does not prepare the PC for SiteConfig network configuration, which requires that the SiteConfig Discovery Agent be installed. Since IT policies at many customer site's prohibit installation of software such as the SiteConfig Discovery Agent on corporate LAN PCs, this topic prepares the PC for software deployment only, without installing the Discovery Agent.

On the PC that hosts the SiteConfig application, navigate to the directory at which SiteConfig is installed. By default the location is C:\Program Files (x86)\Grass Valley\SiteConfig.
Copy the contents of the ConnectivityKit directory to a USB thumb drive, network drive, or some other shared location to make it easier to distribute to each corporate LAN PC.
To install and configure SiteConfig support locally at a corporate LAN PC, do the following:
1. Copy the contents of the ConnectivityKit directory to the corporate LAN PC.
2. On the corporate LAN PC, run \Connectivity Kit\setup.exe. If necessary, .NET software is installed.
3. Open firewall port settings on the PC as follows.
  
  445
  
  Protocol: TCP. Used by SDB and XMOS Server and NAS. Used by SiteConfig. File and printer sharing. Used by SMB.
  
  3389
  
  TCP: Used by Remote Desktop for use by SiteConfig.
  
  18262
  
  TCP: Used by GV ProductFrame Configuration Service, ProductFrame Discovery Agent Service for use by SiteConfig. Used by GV NetConfig Service. gv-pf. UDP: Used by GV NetConfig Service. gv-pf.
  
  18263
  
  UDP: Used by ProductFrame Discovery Agent Service for GV NetConfig Device Broadcast/Unicast Protocol. Used by SiteConfig. Sent by ControlPoint, received by Devices
  
  18264
  
  UDP: Used by ProductFrame Discovery Agent Service for GV NetConfig Controller Protocol. Used by SiteConfig. Sent by Devices, received by ControlPoint
  
  49168
  
  HTTP/TCP: Used by Grass Valley K2 Config for K2Config application connection between a control point PC and the K2 system device configured. Used for most functions.
  
  49169
  
  TCP: Used by Grass Valley K2 Config for K2Config application connection between a control point PC and the K2 system device configured. Used for a few functions that require longer time periods.
4. Restart the corporate LAN PC.

The corporate LAN PC is now prepared for SiteConfig software deployment.

Next, test access to proxy location.