Configure Network Configuration page - GV STRATUS server



This server has a control network connection only, so if it is configured correctly, there is no other configuration to do on this page.

  1. Verify that the top port is configured correctly. The top port is the port over which the K2Config application is communicating. If correctly configured, it is already assigned the control network IP address, as displayed on this page.
  2. Click Next.

The File System Server Configuration page opens.

Parent topic: Configuring a GV STRATUS Proxy server

Copyright © 2020 Grass Valley Canada. All rights reserved. Specifications subject to change without notice. GV STRATUS 6.10 gvtp_20200811_04:57:17