POST check
POST (Power-On Self Test) is a self-test function stored on the motherboard of the FT server.
When you power on the server, the POST will start automatically to check the motherboard, ECC memory modules, CPU/IO modules, keyboard, mouse, etc. It also shows startup messages for various BIOS setup utilities.
To view details of the POST, do one of the following:
- While the POST is being performed, press the Esc key.
- View the POST details from the beginning without pressing the ESC key when the BIOS menu appears. To do this, select System Configuration, then Advanced and set the Boot-time Diagnostic Screen to Enabled.
- View the test items and details from a management PC where ESMPRO Manager is installed.
You do not always need to check the POST details. You will need to check messages when one of the following conditions exist: