Cable connections
Cable connections to the FT server are made on the rear of the unit to the backplane and to both CPU/IO modules as described here.
Refer to the illustration of the rear module and its cable connections below.
- Connect a mouse and keyboard to the USB connections on the backplane.
- Connect a flat screen to the bottom VGA serial connector.
- Connect the AC cords to each of the CPU/IO AC receptacles but do not power up. Notice that when the AC cord is inserted, the AC Stopper bars will engage as shown below. The Stopper bars prevent you from removing a CPU/IO module with the AC cord connected (while powered up).
- The Teamed Duplex LANs connect the FT server to the network as appropriate for the FT server's use as a Grass Valley system device below.
