Locating a failed hard drive
Use this procedure to locate a failed hard disk drive. A failed hard disk drive will be indicated by an amber DISK ACCESS LED on the hard drive handle.
To verify a disk failure, do the following:
- From Start, select All Programs, RDR, and click RDR Utility to start the RDR Utility.
- From the tree on the left pane of the RDR Utility, select each disk and check the values of MTBF: Current and MTBF:NumberOfFaults in the right pane.
- Refer to the table below, if either of the values is different from the normal value, the disk has an error.
- If an error is indicated, replace the hard disk drive.