Configuring the MOS Device for Octopus
-
Launch
the Octopus client, and click the Devices button.
The Devices page opens.
-
Click
the New button on the
toolbar.
The Device window opens.
-
Configure the Basic tab
as follows:
mosID These values must match those set for the XMOS Server. ncsID Version This value must match with the version set for the XMOS Server. Disabled Unchecked Media host Name or IP address of machine hosting the SDB Server. Media port SDB Server port (normally won’t change from default setting) Rundown host Name or IP address of machine hosting the XMOS Server. Rundown port XMOS Server port (normally won’t change from default setting) - Configure the Stories tab as follows:
- Configure the Rundowns tab as follows:
- Configure the Prompting tab as follows:
- Configure the Status tab as follows:
- Configure the MOS Objects tab as follows:
- Configure the Placeholders tab as follows:
- On the Other tab, configure as follows:
- Click OK.