Setting channel configuration
| Setting | Options | Description | |
|---|---|---|---|
| Select Channel | 1-6 | Select the channel to configure. | |
| Channel | Channel Name | Enter a name for the channel. | |
| Include in Rotation | On; Off | Check Include in Rotation to include this channel when automatically assigning channels. | |
| Use Backup | On; Off | Check Use Backup if you are using a second media server for mirrored playback. | |
| Main Playback Channel/Backup Playback Channel | Control Type | RS 422; Ethernet | Select the type of channel connection. |
| Playback Control Port | Select the primary port for this channel. | ||
| Media Server | Enter the name of the K2 Media Client, K2 Summit Production Client or M-Series. | ||
| Server Channel Name | Enter the name of the channel you are using for this playback channel. Use the naming convention VTR1, VTR2, etc., for the channel name. | ||
button to
view the complete list of channel information after the configuration. 
This symbol 
indicates
that a GV STRATUS Rundown channel is no longer connected
to its corresponding channel on the media server. Check the following possible
problems; as you cannot remotely control the media server while this symbol is
present:
- Playout channels on the media server are not set to use the remote AMP protocol.
- If you are using RS-422, there is no physical serial/network cable connection between GV STRATUS Rundown and the media server used for playout.
- If you are using Ethernet channel connections, the entries for media server or Server Channel Name are not set correctly in the GV STRATUS Rundown Channel Configuration.
- COM ports are set incorrectly in the GV STRATUS Rundown Channel Configuration.