Troubleshooting GV STRATUS VTR Controller configuration

If you see a red indicator next to the VTR’s name, try restarting GV STRATUS VTR Controller.

If the VTR status still displays a red indicator, verify the following:
  • Check your GV STRATUS VTR Ingest configuration and make sure the VTR information matches the information you entered when configuring GV STRATUS VTR Controller.
  • The correct COM port has been specified for the VTR.
  • The COM port is not being used by another application controlling the VTR.
  • The VTR is turned on.
  • The hardware has been correctly installed.
  • The IP address or computer name where GV STRATUS VTR Controller is installed matches the address or name in the GV STRATUS VTR Ingest application.
Parent topic: Configuring GV STRATUS VTR Controller Application

Copyright © 2011 - 2021 GVBB Holdings SARL and Grass Valley USA, LLC. All rights reserved. Specifications are subject to change without notice. GV STRATUS 6.11 gvtp_20210726_01:23:36