Name adapters

If not already open, open Network Connections as follows:
1. Open the Windows Network and Sharing Center control panel.
2. Click Change Adapter Settings. Network Connections opens.
In Network Connections, click View | Details.

For GV STRATUS servers without an FTP/Streaming connection (Proxy, Proxy Storage file system), verify adapter names. The required adapter names are specified in the following table:

Adapter name
Control Connection
Unused Connection 0
Unused Connection 1
Unused Connection 2

For GV STRATUS servers with an FTP/Streaming connection but no media (iSCSI or LAN Connect) connection, (Express, Core), verify adapter names. The required adapter names are specified in the following table:

Adapter names
Control Connection
FTP-Streaming Connection
Unused Connection 1
Unused Connection 2

For GV STRATUS servers with an FTP/Streaming connection and with one or two media (iSCSI or LAN Connect) connections, (Render Engine), verify adapter names The required adapter names are specified in the following table:

Adapter names
Control Connection
FTP-Streaming Connection
Media Connection #1
Media Connection #2

Proceed as follows:
- If all the names on this system are configured correctly to locations, skip the rest of this procedure.
- If names on this system are not configured correctly, for each adapter name incorrectly configured, complete the remaining steps of this procedure.
Select the name in the Name column.
Select File | Rename to enter rename mode.
Type the name required.

Next, reorder adapters.