Configuring a Router

You can use Jupiter, Encore, or SMS7000 router in your operation.

You need to configure your router on the Router Configuration panel in the GV STRATUS Control Panel application.

When connecting to a Jupiter router, use the ESswitch interface protocol. If you are connecting a Jupiter router using a serial hub, you need to configure a virtual COM port and install the software before configuring the router.

You can also use Jupiter with the AccuSwitch application that can be configured in the GV STRATUS Control Panel application.

Encore system can be configured to control cross points of a single routing matrix, or expanded to control multiple matrices depending on your system needs.