Other Topic Library Versions

Adding a Proxy server to the SiteConfig system description

  • The system description must contain a group.

This topic applies to a K2 SAN's Proxy server, which is the GV STRATUS server with role of Proxy Server attached to an online or production K2 SAN.

  1. In the Network Configuration | Devices tree view, right-click a group and select Add Device.
  2. Configure settings for the device you are adding as follows:
    • Family – Select STRATUS.
    • Type – Select STRATUS Server.
    • Model – Select STRATUS Proxy Server.
    • Name – This is the device name, as displayed in the SiteConfig device tree view and device list view. This name can be different than the host name (network name). You can accept the default name or enter a name of your choice. Devices in the tree view are sorted alphabetically.
    • Amount — Select 1.
    • Platform — Select x64.
    • Control network– Select the control network.
    • Starting Address – Select from the list of available addresses on the selected control network. If adding multiple devices, this is the starting address, with addresses assigned sequentially to each device added.
  3. Click OK to save settings and close. SiteConfig adds the Proxy server to the system description as a placeholder device.
  4. Verify that the unmanaged control network interface is configured correctly and modify if necessary.

Next, add the GV STRATUS server to the control network.

Copyright © 2019 Grass Valley Canada. All rights reserved. GV STRATUS 6.8 gvtp_20190318_01:43:25