Other Topic Library Versions

Adding a GV STRATUS server to a SAN

You can add a GV STRATUS server to a SAN as follows:

  1. If you have not already done so, in SiteConfig, add the server to the appropriate group and verify that it is communicating correctly on networks.
  2. In the K2Config application tree view, select the name of the K2 SAN, which is the top node of the storage system tree.
  3. Click Add Device. The Add Device dialog box opens.
  4. Select GV STRATUS Core Services Server. This is the correct selection for the following GV STRATUS servers:
    • Proxy server (A1)
    • Proxy Storage file system server (B1, C1)
  5. Click OK. The new server appears in the tree view.

Next, if the server is a redundant iSCSI client on a K2 SAN, install MPIO software. Then configure the server.

Copyright © 2019 Grass Valley Canada. All rights reserved. GV STRATUS 6.8 gvtp_20190318_01:43:25