Other Topic Library Versions

BIOS startup

Prerequisite:
  • Verify that the AJA card is installed with the desired feeds attached
  • The Control and iSCSI/IP/SMB network cables are connected to 1G and 10G ports respectively
  • Verify that the nVidia card is installed

After the power-up of GV I/O Live Ingest and Playback Server, the VGA monitor displays BIOS information, with instructions on how to access settings.

  1. Press the F2 key on the keyboard to enter System Setup pages.
  2. On the System Setup screen, select System BIOS.
  3. Configure settings as below:
    • Boot Settings: Boot Mode set to BIOS (not UEFI)
    • System Profile:
      • System Profile set to Custom
      • Energy Efficient Policy set to Performance
      • Disable the C1E option
    • Processor Settings: Enable the Logical Processor option

When BIOS settings have been completed, the Windows operating system begins to load.

Parent topic: Installing GV I/O Live Ingest and Playback Server

Copyright © 2019 Grass Valley Canada. All rights reserved. GV STRATUS 6.8 gvtp_20190318_01:43:25