Other Topic Library Versions

Adding a GV I/O Client - Shared Storage to the system description

  • The system description must contain a group.
  1. In the Network Configuration | Devices tree view, right-click a group and select Add Device.

    The Add Device dialog box opens.

  2. Configure settings for the device you are adding as follows:
    • Family – Select GV STRATUS.
    • Type – Select GV I/O Client - Shared Storage.
    • Model – Select GV I/O Client (SMB).
    • Name – This is the device name, as displayed in the SiteConfig device tree view and device list view. This name can be different than the host name (network name). You can accept the default name or enter a name of your choice. Devices in the tree view are sorted alphabetically.
    • Amount – You can add multiple devices, as currently defined by your settings in the Add Device dialog box. An enumerator is added to the name to create a unique name for each device added.
    • Platform – Select x86 for 32-bit operating system or x64 for 64-bit operating system.
    • Control network – Select Corporate LAN or Control, as appropriate for the PC's network connection.
    • Starting Address – Select from the list of available addresses on the selected control network. If adding multiple devices, this is the starting address, with addresses assigned sequentially to each device added.
  3. Click OK to save settings and close.
  4. Repeat these steps for each of your devices.
  5. If the server is on the control network, verify that unmanaged control network interfaces are configured correctly and modify if necessary.

Copyright © 2019 Grass Valley Canada. All rights reserved. GV STRATUS 6.8 gvtp_20190318_01:43:25