Other Topic Library Versions

Creating a segment list

You can create a segment (or batch) list using GV STRATUS VTR Ingest.

You must have the Write permission for Name and Asset Type fields for VTR Ingest in the GV STRATUS Control Panel to be able to ingest the segments.

  1. Insert a tape into the VTR.
  2. Click the Tape ID button .

    If you don’t enter a Tape ID and you already checked the Prompt for Tape ID box within GV STRATUS VTR Ingest configuration, GV STRATUS VTR Ingest prompts you before you add the first clip. The Tape Properties dialog box displays on the screen.

  3. Enter the Tape ID.
  4. Play through the videotape to get the footage you need.
  5. Select a different record location for the clip, if you want to.
  6. Mark an In and Out point for a clip.
  7. Click Add Segment to List button or press C on your keyboard.

    The clip is added to the list on the Channel Window.

  8. Repeat steps 5-8 for additional clips.
  9. To use additional tapes, insert a new tape into the VTR and repeat the steps above.

When you eject a tape, GV STRATUS VTR Ingest clears the tape ID field. You can add the new videotape name anytime after you insert a new tape. If you haven’t entered a new Tape ID before you add the first clip from that tape to the segment (batch) list, GV STRATUS VTR Ingest prompts you to add one.

Copyright © 2019 Grass Valley Canada. All rights reserved. GV STRATUS 6.8 gvtp_20190318_01:43:25