Other Topic Library Versions

Set as active RDR plex

A physical disk can be set as “Active RDR Plex” by a command.

Active RDR Plex is the disk on which the data reading process is performed when Load Balancing of RDR Virtual Disk is off.

  1. Start the RDR Utility and right-click a target disk in the left pane and click Set As Active RDR Disk.
  2. In the Set As Active RDR Plex dialog box, click OK. Active RDR Plex can be viewed from Active RDR Plex of the RDR Virtual Disk. (In the image below, the disk in slot 1 of PCI module 10 is set to Active RDR Plex among physical disks constructing RDR Virtual Disk 2.)

Copyright © 2019 Grass Valley Canada. All rights reserved. GV STRATUS 6.8 gvtp_20190318_01:43:25