Other Topic Library Versions

Cable connections

Cable connections to the FT server are made on the rear of the unit to the backplane and to both CPU/IO modules as described here.

Refer to the illustration of the rear module and its cable connections below.

  1. Connect a mouse and keyboard to the USB connections on the backplane.
  2. Connect a flat screen to the bottom VGA serial connector.
  3. Connect the AC cords to each of the CPU/IO AC receptacles but do not power up. Notice that when the AC cord is inserted, the AC Stopper bars will engage as shown below. The Stopper bars prevent you from removing a CPU/IO module with the AC cord connected (while powered up).

  4. The Teamed Duplex LANs connect the FT server to the network as appropriate for the FT server's use as a Grass Valley system device.

Copyright © 2019 Grass Valley Canada. All rights reserved. GV STRATUS 6.8 gvtp_20190318_01:43:25