Other Topic Library Versions

Installing rack rail brackets in untapped rack

The FT server chassis requires 4RUs of space. Be sure to have another person help you to install the chassis, do not attempt to install it alone.

You will need the following hardware from the accessory kit to install the rack rail brackets to support the chassis in a untapped rack:
  • 2 rack rail mounting brackets
  • 2 front flange adapters (ADAPTER-FR)
  • 2 plate adapters (PLATE)
  • 8 panhead screws
  • 4 washers
  1. Locate the desired positioning of the FT server in the rack.
  2. On both sides of the rack, line up the front adapter and plate as shown below.

  3. Attach the front adapters and plates to the front of the rack with the panhead screws provided on the left and right sides of the rack front.
  4. Now attach the rear of each rack rail bracket to the left and right rear sides of the rack using the 4 remaining panhead screws and washers. No adapters are necessary for this step.

  5. Now go to the instructions for installing the FT server chassis.

Copyright © 2019 Grass Valley Canada. All rights reserved. GV STRATUS 6.8 gvtp_20190318_01:43:25