Other Topic Library Versions

Replacing Optical DVD drive

Use this procedure if you need to replace the optical DVD drive. You may remove this drive while the FT server is powered up.

  1. Remove the front bezel from the chassis.
  2. Remove the entire front unit containing the optical DVD drive by turning the thumb screw on the bottom of the drive unit to the left and pulling out the entire unit.

  3. Once the drive unit is free, loosen the top screw holding the DVD drive in the front unit.

  4. Pull out the DVD drive.

  5. Reverse the steps above to install a replacement DVD drive.

Copyright © 2019 Grass Valley Canada. All rights reserved. GV STRATUS 6.8 gvtp_20190318_01:43:25