To connect a
VTR to a GV STRATUS VTR Controller PC, you need to
install a PCI 422 SMPTE 8 Port RoHS RS-422 card.
-
If you are
connecting one or more VTRs to GV STRATUS VTR Controller, install the RS-422 card in your computer, making
sure the dip switches are set to the down position as shown, and install the
card’s driver.
Note: If only one VTR is to be connected to a GV STRATUS VTR Controller PC, you can
use an alternative connection method with an RS-422 to RS-232 cable
connected to the onboard COM1 port.
-
Connect the VTR(s)
to the GV STRATUS VTR Controller
machine via RS-422 cable.
-
If you are using LTC
for timecode, connect a timecode cable from the timecode source (VTR) to the
media server.