Configuring Proxy Config settings: Required
All systems, all workflows, require this
process.
If you are configuring Grass Valley Media Server
MDI settings, you must make those settings first before doing this procedure.
If you received your system pre-configured from Grass Valley, your Proxy Config settings are already configured so you can skip these tasks. Otherwise, work through this section sequentially to configure your Proxy Config settings.
Note: A GV STRATUS system must have only one proxy location
and server, so these settings apply to all K2 Summit systems, both standalone
and SAN.
Note: On an operational system, consult with Grass Valley Support before
attempting to change Location of Proxy Assets, SMB Server, or HTTP Server
settings. Changing these settings requires a purge of the GV STRATUS database
and a new K2 storage file system, which results in a loss of high-resolution and
low-resolution media. Grass Valley Support can provide methods to avoid this
loss of media.
To locate these settings, click Core | Proxy Config