SiteConfig network setup for corporate LAN
Only systems
with GV STRATUS client PCs on the corporate LAN require this process. Add the
corporate LAN to the SiteConfig system description.
- Open the SiteConfig application.
-
In the Network Configuration
| Networks tree view, select a System node or a Site
node.
The networks under that node are displayed in the list view.
-
If the corporate LAN is
not already in the system description, proceed as follows:
- To add a network under the currently selected node, in the tree view right-click the node and select Add Network.
The Network Settings dialog box opens. -
Configure the settings for the network as follows:
- Type – Ethernet
- Usage – Control
- Redundancy – None
- Name – Enter a name to identify the network in the system description
- Exclude from Host Files – Select the checkbox
- Unmanaged – Select this option, then select DNS and select the checkbox for IP Address Allocation via DHCP.
- Base IP Address – Do not configure
- Number of IP Addresses – Do not configure
- Subnet Mask – Do not configure
- DNS Servers – Servers providing DNS for name resolution. These DNS server can be for both managed and unmanaged networks.
- Default Interface Name Suffix – The suffix added to the end of host names to identify interfaces on this network.
- Click OK to save settings and close.
- If you added a network, it appears in the Network Configuration | Networks tree view at the bottom of the list.
Parent topic: Client PC set up process
Copyright © 2011 - 2023 GVBB Holdings SARL and Grass Valley USA, LLC. All rights reserved. Specifications are subject to change without notice. GV STRATUS 7.0 gvtp_20231124_15:10:36