Before installing software, make sure the client PC meets system requirements,
especially regarding Windows operating system and .NET version.
Use this topic to install software (if
necessary) and configure PCs that are on the corporate LAN to prepare them for
SiteConfig software deployment. This topic does not prepare the PC for
SiteConfig network configuration, which requires that the SiteConfig Discovery
Agent be installed. Since IT policies at many customer site's prohibit
installation of software such as the SiteConfig Discovery Agent on corporate
LAN PCs, this topic prepares the PC for software deployment only, without
installing the Discovery Agent.
-
On the PC that hosts the SiteConfig
application, navigate to the directory at which SiteConfig is installed.
By default the location is C:\Program Files (x86)\Grass
Valley\SiteConfig.
-
Copy the contents of the
ConnectivityKit directory to a USB
thumb drive, network drive, or some other shared location to make it easier to
distribute to each corporate LAN PC.
-
To install and configure SiteConfig
support locally at a corporate LAN PC, do the following:
-
Copy the contents of the
ConnectivityKit directory to the
corporate LAN PC.
-
On the corporate LAN PC, run
\Connectivity
Kit\setup.exe.
If necessary, .NET
software is installed.
-
Open firewall port settings on
the PC as follows.
- 445
- Protocol: TCP. Used by SDB and XMOS
Server and NAS. Used by SiteConfig. File and printer sharing. Used by
SMB.
- 3389
- TCP: Used by Remote Desktop for use by
SiteConfig.
- 18262
- TCP: Used by GV ProductFrame Configuration Service, ProductFrame Discovery Agent Service for use by SiteConfig. Used by GV NetConfig Service. gv-pf. UDP: Used by GV NetConfig Service. gv-pf.
- 18263
- UDP: Used by ProductFrame Discovery Agent Service for GV NetConfig Device Broadcast/Unicast Protocol. Used by SiteConfig. Sent by ControlPoint, received by Devices
- 18264
- UDP: Used by ProductFrame Discovery Agent Service for GV NetConfig Controller Protocol. Used by SiteConfig. Sent by Devices, received by ControlPoint
- 49168
- HTTP/TCP: Used by Grass Valley K2 Config for K2Config application
connection between a control point PC and the K2 system device configured. Used for most
functions.
- 49169
- TCP: Used by Grass Valley K2 Config for K2Config
application connection between a control point PC and the K2 system device
configured. Used for a few functions that require longer time periods.
-
Restart the corporate LAN PC.
The corporate LAN PC is now prepared
for SiteConfig software deployment.
Next, test access to proxy location.