Using the GV AMA plug-in
- Check the GV AMA plug-ins are installed. At the Editing software,
select TOOLS and choose
Console to call up the console
window. At the bottom of the window, type AMA_ListPlugins. A report is displayed below:
AMA PLUG-IN NAME COMPANY NAME VERSION
- Avid MXF MSP Plug-In Avid Technology, Inc. 1.1
- Sphere (5850 1.1.5964899) Avid Technology, Inc. 1.1
- AS-02 Plug-In Avid Technology, Inc. 1.2
- AS-11 Plug-In Avid Technology, Inc. 1.0
- MSP_GrassValley for 64Bit OS Grass Valley USA, LLC. 0.3
- MSP_MXF Plug-In Avid Technology, Inc. 1.9
- QuickTime Plug-In Avid Technology, Inc. 1.3
- WaveAiff Plug-In Avid Technology, Inc. 1.0
- Verify the MSP_GrassValley and MVP_GrassValley plug-ins are listed.
- Confirm the plug-ins are correctly installed and configured.
- To verify and configure the volumes, the volume must be mounted and
mapped using driver letter V:
before the GV AMA plug-ins can be used to link any files.
If SNFS client are used: SNFS client mounting are used if K2 SAN’s are used. Verify the SNFS client are installed and configured to use driver letter V:.
If SMB client are used: SMB client mounts are used when working on standalone K2 Summit system. The K2 Summit system V: drive must be shared at root level with the Share Name V before this drive can be mounted using the command shown below: The volume is mounted, using the following command. net use V: \\SummitHostname\V /USER:SummitHostname\administrator /PERSISTENT:YES.
If Removable drives are used: If the original media on the K2 Summit system existed in V:\media\default\Myclip.cmf \, then the removable drive should have the same path media\default\Myclip.cmf \ and all the media files should reside in the Myclip.cmf folder.
The GV AMA plug-in supports linking to files in two ways:
- Manually link to files using FILE | AMA LINK.
- Manually link to volumes (folders) FILE | LINK TO AMA VOLUMES.
-
To manually link to files, do the following:
-
To manually link to volumes (folders), do the
following: