Setting a Schedule for an Alarm
REQUIREMENTS: |
Make sure you meet the following conditions before beginning this procedure: |
• If you are working in iC Web, make sure you have opened the appropriate iControl Web page ( click HERE). |
• If you are working in iC Navigator, make sure you have opened iC Navigator ( click HERE). |
1. Right-click the alarm, and then click Create schedule.
[ Graphic ]
2. In Schedule Entry Details, type a name for the schedule, and set the appropriate options such as the start date and time recurrence pattern, and the end date.
[ Graphic ]
3. In the Action details section, select the appropriate action in the list, and specify the length of the period during which the specified action will apply.
4. The selected alarm already appears in the Selected alarms list. To add other alarms to this schedule, select them in the Available alarms list, and click the down arrow button to add them to the Selected alarms list.
TIP: Multiple alarms can be selected at once by holding down the Shift or Ctrl key while clicking.
5. To remove alarms from the Selected alarms list, select them and click the up arrow button.
6. Click OK.
