Removing Physical Routers


NOTE: Although it is possible to perform the following procedure as a stand-alone task (assuming all stated requirements are met), Grass Valley recommends you familiarize yourself with the sample workflow on page 2 in which this procedure is only one step within a sequence.


REQUIREMENT:
Before beginning this procedure, make sure you have opened Router Manager Configurator (click HERE).

1. In the RouterManager folder, select the Physical routers sub-folder.

[ Graphic ]

System Response: The list of physical routers appears in the right pane.

2. Select the router you wish to remove from the list, and then click Remove Router.

[ Graphic ]

3. Click Save.