Upgrading K2 Dyno Replay Controller Software

This section contains the tasks necessary to upgrade the following K2 Dyno models:
  • K2 Dyno S Replay Controller
  • First generation K2 Dyno Replay Controller.
Follow topics as appropriate for the model you are upgrading.

This section also refers to the upgrade of the K2 system software in relation to any K2 Dyno requirements. The K2 Summit/Solo system must be upgraded to the compatible version before the K2 Dyno software upgrade. Instructions for performing the entire K2 system upgrade are provide in "K2 Release Notes".

K2 Dyno software version 3.2 requires K2 system software version 9.2. This version of K2 system software requires Windows 7 operating system. If the K2 Summit/Solo system you are upgrading is currently at a K2 system software version lower than 9.x, you need to upgrade the hardware on your K2 Summit/Solo system to support these requirements. Consult Grass Valley Support to upgrade the hardware on your K2 Summit/Solo system.

When installing/upgrading the K2 Dyno software, you must consider versions and compatibility for all K2 system components as listed in the Version Compatibility section given earlier in these release notes.

Note: Please read these upgrade instructions completely before proceeding with any upgrades.
Parent topic: About This Release

© 2014 Grass Valley USA, LLC. All rights reserved. Grass Valley is a registered trademark of GVBB Holdings S.a.r.l.