Configuration Network Tab from Transfer Setup
-
On the CONFIG screen, tap NETWORK.

-
For Include
guard bands on send, tap Yes to include guard bands when transferring elements to external devices.
-
For Mount K2
Mapped Drives, tap Yes to automatically mount your K2 mapped drives after the start-up of K2
Summit and K2 AppCenter.
-
Tap SEND
LIST.
The Transfer Destination panel opens and displays all active transfer rules currently
set for the Session.
-
To create a new transfer rule, do the following:
-
Tap BROWSE to specify the destination of the transfer and initiate a new
transfer rule.
-
Tap ACCEPT once you have selected the destination.
-
Configure transfer rules as follows:
-
Tap On or Off to
activate or deactivate the transfer rule.
-
Tap the second column to transfer a specific or all
angles.
-
Tap the third column to change the format received
at the destination (MXF,GXF, QT).
-
Tap the fourth column to verify the transfer
destination.
-
To create a new destination bin for a transfer, do the
following:
-
Tap BROWSE to select the bin in which you are creating the destination
bin.
-
Press Shift then tap NEW.
A new destination bin is created.
-
To delete a transfer rule, select the rule to be deleted
and then press Shift and tap
DELETE.