Playback options

The K2 Dyno S Replay Controller has four playback options:

Table 1. Playback options
Option	Description
The Play button	Plays a recorded element or record stream at 100%. This is the primary way to place any player channel into a playback state. This works on a playlist, on a highlight, and on the active record trains.
Alternate playback speed. Press and hold down the Fn key and then press the Play button.	Plays a recorded element or record stream at a pre-programmed alternate playback speed, as configured from the HOME screen.
T-bar	Immediately takes control of the speed of the active player channel. Make sure you do not inadvertently touch the T-bar, as doing so changes the playback speed to the programmed speed of the T-bar.
Alt T-bar	The T-bar can be preset with two playback speed configurations: default and alternate.