Editing keywords

To build a keyword table, you must create a highlight.
  1. While the highlight selected is indicated by the blue outline around the slot, tap the highlight properties softkey near the bottom left of the screen.

  2. To make any changes to the existing keyword tables, select EDIT softkey. When you enter the EDIT mode, there are 5 tabs across the top of the touch screen.
  3. To name the tab, tap the tab softkey twice.
    1. To type the name of the selected tab, you can either use the touch screen keyboard or the standard Dyno keyboard.
  4. Once named, press ENTER to set the tab name.  Tabs are also a means of navigating Keyword numbers. Tab 1 contains slots 1-100, Tab 2 101-200 etc.
  5. To delete the keywords and Tab title for the entire active table., select Clear All softkey.
  6. To enter a keyword, first enter the tab and the first box in the table is defaulted to the name given the tab.
  7. Select the box with the tab name. A screen with a series of numbered slots without the / mark in the box is displayed.
  8. To name the individual slot, use the touch screen keyboard.
  9. To lock in the text, press ENTER once the correct keyword has been typed in.

Copyright © 2014 Grass Valley. All rights reserved. K2 Dyno S 3.3 gvtp_20141106_16:24:57