Using PGM or PVW

This setting configures the playback channels as dependent channels. P1 becomes the channel that plays to broadcast. P2 is used to preview or stage the next element to broadcast. Elements cued on P2 (PVW) are transferred to the P1(PGM) by using the Take button.
  1. Enter PGM or PVW mode by selecting the softkey on the Home screen or by pressing Shift | P1.

    In this mode, when a clip is cued, it appears on the P2 channel.
  2. Use the Jog Knob to change the in-point of the clip to the point desired.
  3. Press the Take button from the center stalk.

    The clip is transferred to the P1 channel and play.

    P2 is now ready for cueing the next element.

Parent topic: Playback

Copyright © 2014 Grass Valley. All rights reserved. K2 Dyno S 3.3 gvtp_20141106_16:24:57