Shutting the system down

There are three modes to shut down the system:

Exit to Startup screen
Exit to Shutdown
Exit to Maintenance

Press the Shift button and then from the HOME screen or the CONFIG screen, tap the EXIT SoftKey.
This is the first step in shutting down the K2 Dyno S Replay Controller in three different modes. The Confirm Exit panel opens. The default shutdown mode is the Startup screen.
To exit to Startup screen, do the following:
1. Open the Confirm Exit panel, as instructed by the steps earlier in this procedure.
2. Tap Cancel to abort the Exit command and return to the previous session.
3. Tap Restart to continue to exit. The K2 Dyno S Replay Controller restarts accordingly and displays the Server list, ready to configure a new session.
To exit to Shutdown, do the following:
1. Open the Confirm Exit panel, as instructed by the steps earlier in this procedure.
2. Tap the SoftKey next to the Shutdown mode prompt until it displays Shutdown. When Shutdown is selected, the SoftKey to the left of the blue box changes to Shutdown.
3. Tap Cancel to abort the Exit command and return to the previous session.
4. Tap Shutdown to continue to exit. The K2 Dyno S Replay Controller powers off.
To exit to Maintenance, do the following:
1. Open the Confirm Exit panel, as instructed by the steps earlier in this procedure.
2. Tap the SoftKey next to the Shutdown mode prompt until it displays Maintenance. When Maintenance is selected, the SoftKey to the left of the blue box changes to Exit.
3. Tap Cancel to abort the Exit command and return to the previous session.
4. Tap Exit to continue to exit. The computer leaves the Dyno mode and the Windows operating system desktop is displayed.
5. To return to the Dyno mode from the Windows operating system desktop, double-tap the Dyno S icon on the desktop.