Rebooting the Dyno and continue recording

  1. Go to the HOME Page.

  2. From the bottom strip, select Shift Function Exit.

    If required, the server can remain in record mode despite the state of the Dyno.

  3. To continue recording and rebooting or shutting off  the Dyno, tap the Continue Recording softkey to change it to yes.

    Dyno can be shut down or restarted at this point without interrupting the record train.

Parent topic: Shutting the system down

Copyright © 2014 Grass Valley. All rights reserved. K2 Dyno S 3.3 gvtp_20141106_16:24:57