Configuring DynoZoom output video format on the K2 Dyno Replay Controller

Use the DynoZoom tool on the K2 Dyno Replay Controller to configure the output format on the DynoZoom Frame.
  1. On the K2 Dyno Replay Controller, open the DynoZoom tool.
  2. Select SETUP. The Output video format screen opens.

  3. Select the desired format. This format is delivered at the SDI Out 1 connector on the DynoZoom Frame. You can also use the GV DynoZoom application on the K2 Summit 3G system system to configure the DynoZoom output format.
Parent topic: DynoZoom

Copyright © 2014 Grass Valley. All rights reserved. K2 Dyno S 3.3 gvtp_20141106_16:24:57