Other Topic Library Versions

Install software on K2 Dyno Replay Controller

Stop all other applications and media access to K2 systems. This includes all record, play, and transfer operations.
  1. Copy the directory that contains the Dyno Client software onto a portable USB drive such as a Flash drive.
  2. Connect the USB drive to the K2 Dyno S Replay Controller and on the USB drive, locate and open the following file: DynoSetup.exe
  3. Follow the onscreen instructions, and work through each page.
  4. Click Next and Close to complete the installation.
  5. Remove the portable USB drive, if it is still connected.
  6. Restart using standard Windows procedures.
Parent topic: Upgrade K2 Dyno S Replay Controller

Copyright © 2015 Grass Valley USA, LLC. All rights reserved. K2 Dyno S 3.4 gvtp_20150218_00:01:42