Timecode matching a local clip with remote clips

On the K2 Dyno S Replay Controller, select P1 or P2.
Select a local Highlight clip in a local Highlight bin.
On the K2 Dyno S Replay Controller, press Fn | Cue Up buttons.
From the available matching clips and angles, double-tap a thumbnail to load the clip on the selected P1 or P2 channel.
Use the Jog Knob, T-bar, or Play button to control the channel.
All angles associated with the clip are available with the angle buttons.
Verify that connected K2 Summit systems have matching timecode for frame accurate matches to valid sources across record trains. The in-point or out-point of the local clip must exist within the range of the guardbands of remote clips to be valid results.
To access clips across the network by way of Library navigation, do the following:
1. Open the LIBRARY screen to navigate to a shared K2 Summit system.
2. Select the desired session created by the remote K2 Dyno S Replay Controller.
3. Open the remote Highlight Bin and locate the desired clip.
4. Select the clip in one of the following ways:
  - Double-tap the clip
  - Tap the clip and press the Shift | Open buttons on the K2 Dyno S Replay Controller.
Use the angle buttons on the controller to select the desired angle for playback. All angles associated with the clip are available.

For future quick access, add the remote Highlight bins and Playlist bins to your local Favorites Bar.