Configuring DynoZoom Super Slo-Mo Channels on the K2 Summit system

This feature is part of the ChannelFlex Suite.

1. Open Configuration Manager and click Channel.
2. Select C1.

   

3. For Type, select Super Slo-Mo Recorder. Only those settings supported by a Super Slo-Mo channel are displayed.
   Note: If you have the AppCenter Elite license yet the Super Slo-Mo option does not appear, it means you do not have the HD license, which is required for Super Slo-Mo. You must also have the appropriate compression license, such as DV or AVC licenses.
4. For Super Slo-Mo Rate, select one of the following:
   • 2x Record Speed
   • 3x Record Speed
   • 6x Record Speed
5. If desired, assign a name to the channel.
6. In the Proxy Setup setting, set Live network streaming to No.
7. Select Video input format.
8. To configure a second Super Slo-Mo Recorder channel, select C2 and repeat steps.
9. To set a player channel, select C3.
10. For Type, select Player/Recorder.
11. If desired, assign a name to the channel.
12. For Record proxy files, select No.
13. In the Proxy Setup setting, set Live network streaming to Yes.

    The channel generates low-latency streaming media, which can be displayed on a K2 Dyno Replay Controller.

    Set this on the Program channel only. Multiple channels generating low-latency streaming media can overload network bandwidth.

14. Set Stream bitrate to the lowest setting appropriate for your required image quality.

    High bitrate streaming media can overload network bandwidth.

15. If operating with DynoZoom, in Video Output settings, for Pan+Zoom, select On.

    Set this on the Program channel only. If set on multiple channels, it takes effect on the channel with the lowest channel number only.

16. To configure a second player channel, select C4 and repeat steps as appropriate.
17. Click Save and OK to close.