Configuring the Summits for a Multi-Summit Session

To use Summit for playout, you set up record channels:

1. In an Asset List panel Location drop-down list, select the location (search provider) you want to search.

   

   If you have more machines connected and you want more channels, use the scroll buttons on the panel to access the machines.
2. Click Start. Dyno will start connecting and the channels will be allocated. Dyno will connect as if it is a 4x2 system. You can get a summary of the system. The players are shown as from one machine and the records are coming from other machines.
3. Press Live to begin the live recording. Recording is from the record Summits and the playback is from the play Summit. You may view the playouts and the records on the monitor. Note that 4K players and recorders provide two scaled down 1080p outputs: one clean and one with SuperOut.
4. Select Highlight properties from the panel. If there were four cameras used, you will see four angles. In a 4x2 system, the angles would beare labeled A, B, C and D. In this example, we have A1, B1, C2 and D2. The 1s and the 2s refer to remote machines.

   

   The highlight properties screen can be used to cue a particular angle, you can change which one is primary, so when you cue up, it will automatically bring up that angle. Everything you can do on a local machine, you can do on a remote machine.