The following
limitations are present in this release of software. If you wish to obtain more
information about these limitations, please mention the reference numbers.
Table 1. Known Issues for the Current Release
ID |
Description |
Workaround |
Dyno-3622 |
Advanced Search: Unable to import from Mapped Drive on
Summit |
None |
Dyno-3607 |
Playlist: SSM material does not play at 100% in Aux
Audio |
None |
Dyno-3553 |
Non Real-Time Priority indication always on |
None |
Dyno-3449 |
Xfr: Cueing transferring playlist locks up Summit channel |
None |
Dyno-3404 |
ShareFlex: Unable to browse remote train after remote Summit
reboots |
None |
Table 2. Known Issues from Previous Releases
ID |
Description |
Workaround |
DYNO-3492 |
Unable to Save/Load SessionConfig file to/from external Summit
drive |
None |
DYNO-3493 |
SaveSessionConfig files do not appear on the Dyno after
saving |
None |
DYNO-3459 |
Transfers: UNC transfer paths don't work |
None |
DYNO-3456 |
Multi-Summit: Copy + Paste splitting up Highlight |
None |
DYNO-3454 |
Transfers missing guardband material to file (.gxf .mxf
.mov) |
None |
DYNO-3449 |
Xfr: Cueing transferring playlist locks up Summit channel |
None |
Table 3. Known Issues from Previous Releases
ID |
Description |
Workaround |
KT-8012 |
Dyno Universe: Update Summit-base image for 10G ATTO NIC. Without
using the correct driver and settings, the 10G ethernet link keeps
dropping occasionally. |
The drivers are located at the following location:
\\hillsfile02\proj\hw_bv\datasheets\Intel\ethernet\ProWin54.exe
After installing the driver, the sysPrep tool needs to ensure that
(including original requirements like correct NIC-bin ordering) the
following 10G specific Advanced properties are set. Receive
descriptor: set value to 4096 (defaults to 512) Transmit descriptor:
set value to 1024 (defaults to 512) |
Known Issues from Previous Releases
PR26134 |
Description: |
You cannot rename a session once it has
started. |
Workaround: |
Choose a session name when selecting
channels. |
PR40482 |
Description: |
A K2
Summit system and K2 Dyno S Replay Controller cannot join an
existing session (go Live) if the record channels have the same
names as the record channels on the first K2 Summit system. |
Workaround: |
On all K2 Summits that are to share sessions,
use the AppCenter application to give the record channels unique
names. |
ncb00040614 |
Description: |
In a playlist, the only valid transition in
or out of a black filler is Dissolve, not Matte. |
Workaround: |
No
workaround. |
ncb00040780 |
Description: |
When operating a playlist in 3D (video + key)
mode, pressing Take causes a slight delay in video playback while
the clip switches. |
Workaround: |
This
is expected. |
DE788 ncb00040378
|
Description: |
You cannot use Aux-audio in a playlist in Gang
Mode. |
Workaround: |
Select only the P1 or P2 channel that the
Aux-audio playlist needs to air on. |
US4196 |
Description: |
In playlist when using Trim mode, clip
information shows entire clip duration including guardbands. |
Workaround: |
No workaround. |
US3196 |
Description: |
In playlist when using Shift+Divide thumbnail
for divided clip takes on that of the original clip. |
Workaround: |
No workaround. |
US1586 ncb00064356
|
Description: |
Deleting clips is slow. |
Workaround: |
No workaround. Rather than hide the process, the
clip location is not fully available in the file system until the
content is completely removed. |
DE2596 |
Description: |
Deleting a session takes time. |
Workaround: |
Delete sessions prior to creating a new one as
part of your pre-production process to allow for space to be created
on the drives. |
US2506 |
Description: |
In playlist during a transition with off-speed
clips, the speed of the outgoing clip is applied to the incoming
clip through the transition. |
Workaround: |
No workaround. |
US1433 ncb00062744
|
Description: |
Some character overlays in the multi-viewer do
not appear even though they are applied. |
Workaround: |
Resolution of the monitor is not able or set to
a high enough rate. Increase the display resolution of the
monitor. Minimum monitor resolution is 1024x768. |
US1405 ncb00038934
|
Description: |
In an open Highlight Bin, Shift + New does not
create a new bin. |
Workaround: |
Navigate to the area to view all Highlight Bins
to create a new Highlight Bin. |
DE4490 |
Description: |
When adding an external storage device to the K2
Summit system, Dyno does not “see” it. |
Workaround: |
Plug the device directly into the K2 Dyno S
Replay Controller. |
ncb00076307 |
Description: |
For
users of Dyno software 2.0 and K2 Summit system Build 8.1, the
system is configured to use only four audio track. Dyno playlists
has eight audio track. Hence, Dyno playlists caused problems for the
users to down stream equipment since the other four audio track does
not have the associated audio file. |
Workaround: |
Configure the K2 Summit Channels audio settings in order to record
8 audio channels and match the playlist configuration in Dyno, prior
to exporting the playlists as MXF files. |
DE7000 |
Description: |
ShareFlex remote
train/session stalls on a K2 SAN system. |
Workaround: |
No workaround. The feature
is not supported in the current release. |
DE6759 |
Description: |
The tOG application crashes
after it is launched from the Dyno GUI. |
Workaround: |
Do the following steps to
restart the application:
- Install tOG software.
- Add Registry Application for tOG.
- Start Dyno.
- To launch the application, select the tOG icon.
|