Configuring a live monitoring channel on the K2 Summit system
This feature is part of the ChannelFlex Suite.
If you do not have DynoZoom, you can still do basic live monitoring.
- Open Configuration Manager and click Channel.
- Select your Program play channel.
- For Type, select Player/Recorder.
- If desired, assign a name to the channel.
- For Record proxy files, select No.
-
In the Proxy Setup setting, set Live network streaming to
Yes.
The channel generates low-latency streaming media, which can be displayed on a K2 Dyno Replay Controller.
Set this on the Program channel only. Multiple channels generating low-latency streaming media can overload network bandwidth.
-
Set Stream bitrate to the lowest setting appropriate for your
required image quality.
High bitrate streaming media can overload network bandwidth.
- Click Save and OK to close.