Setting AFD in the Configuration Manager

AFD settings made in Configuration Manager apply only to output on the specified channel.

From the File menu, select System | Configuration.
In Configuration Manager, click the Channel tab and the specific channel tab that you want to modify.

Scroll down to AFD settings and select one of the options:

For this setting...	Configure as needed...
AFD Settings	Defines AFD in clips output from the K2 Summit system. You can select the following: Record AFD as clip property: Yes – When an AFD setting is present it is set as the default in clip properties. This is the default K2 system behavior. No – When an AFD setting is present it is not set in clip properties. Generate AFD on Output: Always – As automatically determined by the K2 system. When Known – As set in clip properties. Never – Pass-through any AFD already present. SD 16:9 Full screen up-conversion AFD: Select AFD code1010 or 1001, as required by your site's downstream processing. This does not affect the visual display at the K2 system output.

For this setting...

Configure as needed...

AFD Settings

Defines AFD in clips output from the K2 Summit system. You can select the following:

Record AFD as clip property:
- Yes – When an AFD setting is present it is set as the default in clip properties. This is the default K2 system behavior.
- No – When an AFD setting is present it is not set in clip properties.
Generate AFD on Output:
- Always – As automatically determined by the K2 system.
- When Known – As set in clip properties.
- Never – Pass-through any AFD already present.
SD 16:9 Full screen up-conversion AFD: Select AFD code1010 or 1001, as required by your site's downstream processing. This does not affect the visual display at the K2 system output.