The
following components are part of K2 Summit 3G+ Production Server. Components are compatible with this release of K2 software as listed in
the following table. Compatible versions are pre-installed on the K2 system when you receive
it new from Grass Valley. For microcode and firmware filenames, refer to tables later in
this section.
Table 1. Component versions
| Component |
Version |
Comments |
| GrassValley K2 Client
software |
10.0 |
Includes AppCenter
|
| Media File System
(SNFS) |
6.0.0.72562 |
— |
| SiteConfig Discovery Agent |
2.1.1.202 |
A minimum version of
1.0.8 is required to support device discovery. Then when you
deploy software to the device, the SiteConfig application
prompts you to upgrade to the correct version of the Discovery
Agent on the device. |
| Windows Operating
System |
Windows 10 Enterprise 2016 LTSB (version
1607) |
K2 Summit 3G+ Production Client only |
| QuickTime |
7.76.80.95 |
— |
| Intel Network
Connections |
22.6.6.0 |
— |
| GV Embedded Security
Manager |
1.0.0.20 |
— |
| McAfee Solidifier |
8.0.0.651 |
— |
| MegaRAID Storage Manager |
17.05.00.02 |
— |
| LSI MegaRaid SAS 2208 ROMB (AIC chipset) controller
driver |
6.714.5.0 |
— |
| Disk image |
20171019-K2Plus-Win10 |
— |
Table 2. K2 Summit 3G+Production Client internal storage RAID controller
microcode file names
| Version |
Microcode file |
| 3.460.165-8277 |
AIC_2208_LSI_FW_3.460.165-8277.rom |
| Find files at C:\profile\microcode\Internal
Storage\Controller\Summit |
Table 3. K2 Summit 3G+ Production Client internal storage
drive firmware file names
| Drive type |
Drive size |
Storage Utility Identifier |
Version |
Firmware file |
| Cloud Speed Ultra II |
400GB |
SDLF1DAM-400G-1H / 0TS1819 |
ZR11 |
Sandisk_400GB_ZR11RE41.dob |
| Cloud Speed Ultra II |
800GB |
SDLF1DAM-800G-1H / 0TS1820 |
ZR11 |
Sandisk_800GB_ZR11RE91.dob |
| Cloud Speed Ultra II |
960GB |
SDLF1DAR-960G-1H / 0TS1792 |
ZR11 |
Sandisk_960GB_ZR11RP91.dob |
| Cloud Speed Ultra II |
1600GB |
SDLF1CRM-016T-1H / 0TS1821 |
ZR11 |
Sandisk_1600GB_ZR11REA1.dob |
| Find files at:
C:\profile\microcode\Internal
Storage\Drive\Sandisk |
