Other Topic Library Versions

Media disk problems

On the Windows desktop open the "My Computer" for you K2 system and do a quick check of the drives. You should see C: and V: drives.
Problem Possible Causes Corrective Actions
No clips appear in the Clips pane. This may be accompanied by a startup message or a StatusPane message regarding media disks being unavailable. A media disk is bad or there has been a hardware failure. Open Storage Utility and identify faulty disks. Replace faulty disks.
The StatusPane message “Media disks getting full…” appears or a “FSS ‘default(0)’” message appears. The media disks are reaching maximum capacity. In Recorder, select the Time Dome and choose Available Storage. If the Time Dome is filled it confirms that your K2 Summit system is out of space. Make space on the media drives by doing the following:

- Delete unused clips and empty the Recycled Bin.

When streaming to another K2 Summit system the operation fails. In Transfer Monitor the streaming operation shows “Status:Error”. There is a network connection error or the media disks at the destination are reaching maximum capacity. Check network connections and configuration. Check available storage on the destination K2 Summit system. In Recorder, select the Time Dome and choose Available Storage. If the Time Dome is filled it confirms that the destination K2 Summit system is out of space. Make space on the media drives by deleting unused clips and emptying the Recycle Bin.
System status message “File system…is fragmented”. Extended record/play activity has fragmented the disks. Use the Storage Utility to check the file system.

Copyright © 2019 Grass Valley Canada. All rights reserved. K2 Summit 10.0 gvtp_20190904_20:05:47