Other Topic Library Versions

Saving settings before generic reimage

  1. Make sure you are logged in to the K2 Summit system with administrator privileges.
  2. Connect the USB Recovery Flash Drive to a USB port on the K2 Summit system.
  3. On the USB Recovery Flash Drive, navigate to the following location: \tools\SaveRestoreScripts.
    Note: Do not attempt to use the same Recovery Flash Drive on multiple systems.
  4. Run the following and wait for the process to complete: psave.bat

    This saves current settings onto the USB Recovery Flash Drive in the \settings directory.

  5. Disconnect the USB Recovery Flash Drive.
Parent topic: Using recovery images

Copyright © 2019 Grass Valley Canada. All rights reserved. K2 Summit 10.0 gvtp_20190904_20:05:47