Other Topic Library Versions

Configure GV STRATUS Rundown workflow

  • A playout destination must be a location on configured and licensed K2 storage.
  • A HotBin must be configured so that when it receives media, it imports that media into K2 storage, to the bin that Aurora Playout monitors.

In this procedure you specify the GV STRATUS Rundown server on which GV Connect accesses placeholders/rundowns and one or more K2 storage locations to which GV Connect exports sequences.

  1. Close GV Connect, if it is currently open.
  2. In System Preferences open K2 FCP GV Connect.
  3. Click the Playout tab.
  4. For Display Name, enter the name that you want displayed on the GV Connect drop-down list. This is name of the location on K2 storage to which GV Connect exports the GV STRATUS Rundown associated sequences.
  5. For Location, click the browse arrow to navigate to and select the HotBin that is configured to import the sequence to the bin that Aurora Playout monitors.
  6. For Format, select the format in which the sequences are exported to K2 storage.
  7. Click Add to add the location as a playout destination.
  8. Repeat these steps to add multiple locations.
  9. Select an item in the list and use the Modify or Delete buttons to manage the list.
  10. For GV SimpleDB Server IP Address, enter the IP address of the GV STRATUS Rundown server on which GV connect accesses placeholders/rundowns.
  11. If you are using NRCS, do the following:
    1. Next to GV XMOS Rundowns/Script Path:, select Active.
    2. Browse to and select the directory where XMOS scripts are stored.
    3. For GV Mos Id, enter the MOS ID that is configured in XMOS.

Copyright © 2019 Grass Valley Canada. All rights reserved. K2 Summit 10.1.2 gvtp_20191213_00:21:37