Other Topic Library Versions

Install DynoZoom upgrade

Before installing a DynoZoom upgrade, the K2 Summit 3G system must be capable of 4K record/play, which includes the following:
  • K2 Summit 3G system chassis. First generation K2 Summit system chassis not supported.
  • SSD disk modules
  • Type IV CPU carrier module
  • 3G codec module
  • Codec option cards
  • K2 software 9.3.x or higher
  • K2-APPCENTER-ELITE license
  • K2-XDP2-3G-2CH 1080p licenses (two required)
  • K2-XDP2-UHDTV1 4K licenses (two required)
Tools and materials needed:
  • Hardware as provided by upgrade kit. See description below.
  • Torx tool with T15 magnetic tip
This section provides instructions for the following field kit:
Upgrade Nomenclature Description
K2-DYNOZOOM-FK K2 DynoZoom UltraHD/4K Pan & Zoom option adds DynoZoom Pan & Zoom. Includes: DynoZoom Software with License on USB drive; DynoZoom Frame, DynoZoom Scaler; DynoZoom PCIe Control Card; DynoZoom PCIe Connection Cable; Installation Instructions. Compatible with K2-XDP2-02/04.
CAUTION:
This system contains board-level components that must be protected from static discharge and physical shock. Wear a wrist strap grounded to the system chassis when handling system components.
Work through the tasks in this section.

Copyright © 2019 Grass Valley Canada. All rights reserved. K2 Summit 10.1.2 gvtp_20191213_00:21:37