Other Topic Library Versions

mSATA boot media removal

Before doing this task, remove the front bezel assembly, disk controller board, and front interconnect board.

  1. To remove the boot media, work on the front interconnect board as illustrated.

    Use a #1 Phillips screwdriver to remove the screws.

    The mounting mechanism is spring loaded and the mSATA media pops up when screws are removed.

    You must use the mSATA boot media provided by Grass Valley. Do not use media procured elsewhere.

  2. When installing, hold down the mSATA media to align for fastening screws.

Copyright © 2019 Grass Valley Canada. All rights reserved. K2 Summit 10.1.2 gvtp_20191213_00:21:37