Other Topic Library Versions

Displaying Super Out information on output/monitor

If licensed for AppCenter Pro or Elite, you can display information on a channel’s SDI OUT2 signal and on the VGA video monitor.

  1. Click System | Monitor Options.

    The Monitor Options dialog box opens.

  2. Select the tab for the channel that plays the video with the information you are displaying.
  3. Do one or both of the following:
    • To display information on the VGA video monitor for the channel, select the checkbox above Monitor.
    • To display information on the channel’s SDI OUT2, select the checkbox above SuperOut.
  4. Select the checkbox for each type of information you are displaying.
  5. From the drop-down list, select the location to display the information.
  6. Configure other channels as follows:
    • To configure other channels with the same settings as the current channel, click Copy to.
    • To configure other channels with their own settings, repeat previous steps as appropriate.
  7. When fully configured, click OK to apply settings and close.

Copyright © 2019 Grass Valley Canada. All rights reserved. K2 Summit 10.1.2 gvtp_20191213_00:21:37